Wednesday, November 13, 2024

Interlox 5707

This guide provides a step-by-step process for preparing a 100 liter solution of Interlox 5707, including necessary materials, mixing instructions, and filtration recommendations.

Preparing a solution of Interlox 5707 requires careful attention to detail and adherence to specific guidelines. This article outlines the steps necessary to create a 100 liter solution effectively.

Materials Needed

  • A clean tank suitable for mixing
  • Water (approximately 80 liters)
  • Interlox 5707 (2.0 liters or 2.15 kg)
  • 25-micron polypropylene filter media

Step-by-Step Preparation

Step 1: Select a Suitable Tank

Choose a clean tank that can hold at least 100 liters of solution. Ensure that the tank is free from contaminants that could affect the quality of the solution.

Step 2: Fill the Tank with Water

Fill the tank with water up to 80% of its working volume, which is approximately 80 liters. This initial water volume is crucial for the mixing process.

Step 3: Add Interlox 5707

Measure out 2.0 liters or 2.15 kg of Interlox 5707. Carefully add this amount to the tank containing the water. It is important to mix well to ensure that the Interlox 5707 is fully dissolved in the water.

Step 4: Adjust the Solution Level

After mixing, adjust the solution level to reach the final working volume of 100 liters. This may involve adding more water to the tank.

Step 5: Check Temperature

Ensure that the solution temperature is within the recommended operating range. This is vital for the effectiveness of the Interlox 5707 solution.

Step 6: Verify Acid Points and pH

Check the total acid points and pH of the solution. Adjust these parameters as needed to meet the required specifications for your application.

Step 7: Final Checks

Before using the solution, make sure to check for any specific conditions or requirements that may apply based on your local water quality and the contents of the previous tank. This ensures optimal performance of the solution.

Filtration Recommendations

For best results, it is recommended to use a 25-micron polypropylene filter media. This type of filter is suitable for most applications and is particularly suggested for high volume steel lines.

For comprehensive filtration equipment, you can contact Excel Laboratories for all types of filtration equipment, including filter bags and pumps. Their mobile number is 9843019701.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.

Ess ESS Trading Authorised distributor for Atotech India Pvt Ltd Location map

Our Billing address and GSTN 21 Mar 2025 ESS ESS TRADING 81,Visveshwara Nagar,  Vilankurichi, Coimbatore - 641035   GST No:   33AHCPG6209J1Z...